The working ways of carbon steel plate

The carbon steel plate is widely used in many professional machinery equipment and large structural parts in the manufacturing industry, for example, in the engineering, energy and mining machinery industries, many products use steel plates with a thickness of 6-20 mm. Some of these plates are flat plates without hollows, while most are plates with 30% porosity. Their specifications and dimensions vary by product and use. After these carbon steel plates are cut by plasma or oxygen, different degrees of flash, slag and burrs will be left on the cut surface. These must be removed, otherwise it will affect the aesthetics and usability of the finished product. The following paper will take you to know about the carbon steel plate.

Some enterprises perform artificial surface treatment on the thermally cut carbon steel plate, mainly using hand tools such as hand grinding wheels, scrapers, and steel hammers for knocking and sweeping. The disadvantages of this sanding method are:

1. The quality is not guaranteed. Manual grinding cannot guarantee the uniformity and completeness of grinding, and will affect subsequent bending, spraying and other processes, and affect the overall appearance and internal quality of the product. 2. The efficiency of manual grinding is difficult to master and count. It all depends on the work status and proficiency of the employee and cannot be guaranteed. 3. Environmental protection issues. The knocking brings dust and slag splashing, which seriously pollutes the air quality and environment inside and outside the work area. 4. There are certain security risks. In addition, the flying slag produced by grinding the workpiece and the handling of heavy objects are the main hidden dangers of personal injury accidents.

The advantages of effective working ways of carbon steel plate

Dry double-sided processing technology. Production line processing, the workpiece is clamped and ground by several sets of opposite clamping rollers. The advantages of this processing method can be described as: 1. The processing effect is good. No residual slag and burrs. The surface treatment effect of a single piece is the same as that of the whole batch of workpieces, which is unmatched by manual processing. 2. High processing efficiency. Using advanced double-sided simultaneous processing technology, the efficiency is increased by at least 60% compared with traditional processing methods. 3. Save a lot of human resources. For continuous processing on the production line, only two employees are needed for loading and unloading. 4. Energy saving and environmental protection, the production line is equipped with a high-efficiency dust removal system, the grinding dust is strictly controlled in the body, completely collected by the dust collector, and can be directly discharged after filtering. However, the high price of such a production line is undoubtedly a considerable expense for the majority of small and medium-sized enterprises. For TJYCT Steel Co., Ltd., it is relaxing to use this effective production line to produce high-quality carbon steel plate.

The recommendation of carbon steel plate factory

The famous and high-quality carbon steel plate factory-TJYCT Steel Co., Ltd. produces high-quality carbon steel plate which is cheap and good. Using effective working ways of carbon steel plate and effective production line, TJYCT Steel Co., Ltd . can produce high-quality carbon steel plate, welcome you to buy carbon steel plate.